Meeting any climate -
and every terrain.
Tailored to your needs: the reinforced ladder-type frame.
The Zetros is built on a straight bolted ladder-type frame, with reinforced front-end and top for special attachments. This rugged frame offers superb torsional flexibility.
Thanks to the wide range of possibilities to modify the length of wheelbase or rear overhang ex-factory provide the ideal basis for the variety of body lengths and make the body mounting process easier and quicker.
Choose from two front-axle suspension options.
The Zetros can be equipped with 3- or 4-leaf parabolic springs for the front axle. The 3-leaf parabolic springs for the front axle are designed for a load capacity of 7.5 t. The individual spring leaves are not located directly on top of each other, but are installed with a slight gap for corrosion protection. The same construction is used in the 4-leaf parabolic springs for the front axle, designed for loads up to 9.0 t. Specially tuned shock absorbers are used for both parabolic spring versions.
Drum brakes offer superior protection.
Drum brakes on all axles are standard equipment for the Zetros. Their encapsulated design protects brake components and is perfect for rough terrain – grit and water cannot get inside the drum. The driver’s workload is also reduced, thanks to finely controllable, precise braking action and uniform response.
Superstructures can be bolted and fastened without drilling.
The Zetros can be optionally equipped with mounting parts which are easily connected to the hole matrix on the frame – pre-installed consoles on the longitudinal elements of the chassis frame for bolting on bodies as well as mounting plates for fastening the sides of the body frame. The Zetros is ready and waiting for your specific superstructure.